Advanced search

38 search results

Page 1 out of 2 Pages

  • setup: Which Windows-version is required as source ?
    Answer: current MOA 2.4.1 can be build with Windows 2003 Servicepack 1 and Servicepack 2.I always use the 2003 SP2 trial as reference source so I ...

  • virtual hardware: CD and DVD devices
    Answer:   CD and DVD devices   You got more or less 4 different options to use CDs: ...

  • virtual hardware: Serial ports
    Answer: Upto Workstation 6.5 you could use max 4 serial ports in a Workstation VM.With Workstation 7 this has been changed and only up to 2 ...

  • virtual hardware: IDE
    Answer:   ide0:0.present = "TRUE" ide0:0.deviceType = "disk" ...

  • virtual hardware: Ethernet - snippets
    Answer: Basically you got 12 different options to set up a virtual network-card: Why 12 ...

  • usage: Cheatcodes - explanation of the different functions
    Answer: the following cheatcodes can be used with MOA 2.4.1 or higherthe left collumn lists the cheatcode - the right collumn explains what happens cheatcode action reboot reboot now shutdown shutdown ...

  • usage: Whats the problem with namedFiles / pagefile ?
    Answer: good that you ask. Running VMware from a LiveCD shows an issue that you ...

  • MOA: Short questions answered in one line ...
    Answer: Can MOA be used as a replacement for the VMware Cold-Clone CD ?yes - you can. You do NOT need a ESX-enterprise-licence as the Converter ...

  • P2V: How to upload a vmdk from Workstation to ESX ?
    Answer: This is the virtual disk of a typical Workstation VM. ...

  • P2V: Coldclone via iSCSI
    Answer: Why iSCSI ? Another way to mount remote virtual disks ? ... so what .... ...

  • usage: How to prepare a ESXi VM so that it can be used from CD
    Answer:   Base installation: Download esxi_35u2.zip ...

  • Introduction: 3. How to identify the vmdk-type ?
    Answer:   The most reliable way to identify the vmdk-type is to look it up ...

  • Parameters used in a vmdk: How to change the adapter-type of an existing vmdk ?
    Answer: A vmdk can be connected to different controllers IDE Bus-logic-controller LSI-logic-controller LSI-logic SAS-controller new paravirtualised SCSI-controller In the ...

  • setup: Initial setup for a large MOA-USB-disk
    Answer:   I need a nice demo-MOA for the VMworld congress in Kopenhagen ....This is a walkthrough ...For demonstration at a VMware meeting I of course want ...

  • add boot-options: ESXi
    Answer: Download: esx 4 i setup iso esxi 3.5 setup iso syslinux winimage   Description:   Known issues: boot fails if not enough RAM is available WARNING: running ESXi like this is NOT suitable for production because ...

  • tweaks: Configure memory behaviour for VMplayer on Windows Hosts
    Answer: Host-wide memory behaviour is configured in the file config.iniYou can find the path to this file by inspecting a vmware.logSearch for a line like this vmx| ...

  • behaviour: mainmem
    Answer: This class of parameters are used on hosted platforms and will be  ignored on ESX.The behavior has changed recently for Workstation on Linux hosts !The ...

  • Error-messages : The file specified is not a virtual disk
    Answer: VMware displays or popsup an error messages like this   Error : The filespecified is not a virtual disk Platform : ESX , Workstation , Fusion Anamnese   I guess you ...

  • Troubleshooting: Why does a Windows 7 VM suspend itself ?
    Answer: Check inside the guest if the powerplan for the Windows 7 is set to set the system to sleep after a specified time.Open Controlpanel > ...

  • virtual hardware: SCSI-controller : the parameters
    Answer: SCSI-controllers only use a few parameters.The present parameter is used as the main-switch - if you set it to "false" all other sub-parameters will be ...

  • virtual hardware: SCSI-devices : the parameters
    Answer:   In recent virtual hardware you can use up to 60 devices - 15 for each available controller.So to identify a SCSI-device you use the controller-number ...

  • behaviour: isolation
    Answer: This class of parameters is used to configure the  interaction between host and guest.Most of this parameters are undocumented so use them with care.Misconfigured parameters ...

  • behaviour: monitor_control
    Answer: monitor_control   This class of parameters is used to configure theinteraction between host and guest.Most of this parameters are undocumented so use them with care.Misconfigured parameters will ...

  • behaviour: Snapshots
    Answer: snapshots What to do with current snapshot when the VM is powered off   snapshot.action = "keep"this can be set with the gui: just power offsnapshot.action = ...

  • Troubleshooting: Bridged network does not work after hibernation of the host
    Answer: When you suspend a VM and then use the hibernation feature of the host the bridged network of a VM may not work after waking ...

  • Workstation and VMplayer: Why does a guest detect so many PCI bridge devices ?
    Answer: Why does the guest detect so many PCI bridge ...

  • Performance Tuning: Tuning guide - setup the host for expected usage ...
    Answer:  Workstation and VMplayer can be tuned in different  directions: best performance of a few VMs low impact on the host run many VMs and over-commit RAM factory defaults   The factory ...

  • Performance Tuning: Tuning guide - finetuning memory
    Answer: Memsize  The amount of virtual memory assigned to a VM is defined by the parametermemsize = "2048"If this value is not defined the defaultmemsize = "32"will ...

  • Performance Tuning: Time required to resume and suspend a VM
    Answer: Time required to resume and suspend a VM Test machine:a Dualboot Dell Intel Quad Core i5 with 8 Gb RAMrunning 2003 and Windows 7   Host OSWindows ...

  • virtual hardware: Ethernet - the parameters
    Answer:   work in progress The main-switch ethernet0.present = "true" virtual Hardware 4 allows up to 4 virtual nics per VM virtual Hardware 7 allows up to 10 virtual nics per ...

1  2  next  >>